-
Choose platform from the drop-down list in the conveyor Setting area. If the selected platform permit you to work with wedges, a checkbox will be visible below the Slide rail row. Check it in order to work with wedges. Note that t...
-
The center support has the option to be used as a support for alpines. When using the support for alpines it will automatically adjust the beam length to match the number of brackets and the distance between them. To enable the alpine mode ...
-
Last Updated: 21/08/2017
in Engineering Tools
Internal users
FlexCAD for AutoCAD/Inventor
Install from Microsoft Software Center (Windows Start Menu)
Calculation/Design/Quotation Tool
Install from Microsoft Software Center (Windows Start Menu)
External users
...
-
To measure distances on a layout in the 3D world the Measure tool is used, in combination with the Reference types feature (snap filter) in the Measure panel window. Two endpoints are defined and the result is presented as the straight dis...
-
The Design Tool makes it possible to use an additional logotype in the drawing template. An additional logotype will be displayed to the left of the drawing template head. Note: It's not possible to remove or replace the original Fl...
-
A conveyor layout with a vertical conveyor in the middle can sometimes be tricky to create if the conveyor is built from two directions. The solution in this situation is to connect the ends with a vertical beam by using the Quick adjust tool. C...
-
.NET 4.6.2 cannot be installed
The Design Tool 2.9.0 requires that .NET 4.6.2 is installed, and should be installed automatically with the Design Tool installation executable. If the .NET 4.6.2 installation fails, it may be due...
-
An existing layout can be converted from the current platform to another by simply selecting the new platform from the platform drop-down list. When the new platform is selected, the application will evaluate the layout to see if it can be conve...
-
The trip panel is used to group hours and expenses on a single line. This function is extremely useful when defining customer visits etc. where you want to be able to add and remove all the costs of a trip easily. Pre-requisites The trip function ...
-
Each installation of the Quotation Tool has it's own local database. FlexLink data is copied into the local database using the web update function from a central repository (our ERP system). But any other data (hour prices, settin...