Standard components

Articles

Use center support for alpines
The center support has the option to be used as a support for alpines. When using the support for alpines it will automatically adjust the beam length to match the number of brackets and the distance between them. To enable the alpine mode ...
How to build discontinued XTUT M and XTUT R modules
The XT transfer modules XTUT M..A and XTUT R..A are discontinued products and not included in the FlexLInk assortment. Therefore these modules are not available in the Design Tool eCatalog. However, it’s possible to build t...
 Set CC distance for multisupports
The CC distance for the multi support brackets can be set in two different ways; Automatic or manual. Both the multi support with single support leg and the one with two support legs work in the same way. First start with connecting the sup...
Export spiral conveyor CAD model
CAD models of standard FlexLink spiral conveyors (product no 5995512) are not available from the FlexLink CAD service (provided by Cadenas). But, there's actually another method to get a CAD model of the spiral: Export from FlexLInk Design ...
WLX end drive unit J
The WLX end drive unit J is a combined end drive unit and idler end unit. A fixed connection makes it possible to quickly design and build a conveyor line without vertical or horizontal alignment. The J-drive is based upon the compact versions of th...