-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The X45e function units can be used in more generic applications outside the X45e platform. This article focuses on the speed mode. It exists in two different sub modes, Sensor mode or Limit switch mode. They are implemented exactly the ...
-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The X45e units are primarily design for the platform X45/X45e/X45H. Still they can be used for a lot of different applications. The units could also be used as a generic motion control for other purposes. This article explains one of the...
-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The X45e units can be controlled either with or without a field bus network. If no field bus are present it is referred to as stand-alone or autonomous mode. The stand-alone mode is most useful in simple application and especially for co...
-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The X45e units can be used for logging events. This is useful for measuring cycle times on a function motor, to tune in movements and for trouble shooting. This article focuses on how to generate a log file but also how to process the lo...
-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The X45e units have two different circuit boards with one microprocessor each (FEG and ECO). The FEG microprocessor has a boot software which can be upgraded by the PST. This boot is normally downloaded by the motor supplier. This articl...
-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The units in the X45e platform can be controlled in three ways. Either you have no communication with the units besides the four digital inputs. This is referred to as autonomous or stand-alone mode. If more communication is required the...
-
As already described in other articles, SAP mode is quite different from Movex mode when it comes to price data. In SAP mode it is essential that the customer number is a valid SAP customer. The customer number in combination with the sales organiza...
-
In Quotation Tool V2.1.20 we've added the ability to export text from any of the Word panels (element description, text elements etc.). This allows you to extract a text from an existing quote, save it on disc and re-use the text at a later point in...
-
Any form that uses the "Word" control has built in spell check capabilities. Spell check is done "on demand" and by default the language used is English (US). The sample below is showing the Quote Document / Text element module, but the "Word" cont...
-
From version 2.0 of the Quotation Tool you have the ability to use any Word template when printing FlexLink material, External material etc.You had this ability in previous versions as well, but changing the template was a lot more cumbersome. In v...