-
The turner is a component usable for visualization purposes when running a simulation. It gives the user a possibility to rotate or translate products. Note: It does not change the origin of the component, only creating an offset. This means t...
-
When selecting a component in the layout list the corresponding component in the 3D view will be highlighted in green. Navigation List of commands Buttons In the top, there are 3 buttons are available. The magnifyi...
-
Free-texts comments can be attached to each layout. From the file menu select Comments After you have entered your comments and clicked Ok you will notice a comment icon at the far right of the menu bar. This indicates that the layo...
-
Last Updated: 30/09/2020
in Engineering Tools X45e Background The Parameter Setting Tool contains a wizard for setting the parameters in the function or drive units. This is started with the Change Node or the New Node command, from the Edit menu. When all questions in the wiza...
-
If you enter http://my.flexlink.com on your smart phone you'll get access to our mobile portal. In here you can view orders and search for products. You can also log in to get access to even more functions such as "Recent orders" etc. The confi...
-
There are several ways to adjust the length of a beam component in the 3D world. One method is to use the Interact feature in the Manipulation group in the Home tab. When Interact is switched on it is possible to change the length by dragging with t...
-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The X45e units are primarily design for the platform X45/X45e/X45H. Still they can be used for a lot of different applications. The units could also be used as a generic motion control for other purposes. This article explains one of the...
-
The FlexLink Design Tool lease is personal, but not assigned to any specific computer. After activation (first login) is done the lease is locked to the computer. It is not possible to use the lease on several computers simultaneously. However, the ...
-
Last Updated: 06/11/2019
in Engineering Tools X45e Background The X45e units have two different circuit boards with one microprocessor each (FEG and ECO). The FEG microprocessor has a boot software which can be upgraded by the PST. This boot is normally downloaded by the motor supplier. This articl...
-
When a conveyor is partly mounted in a machine, it may be a problem to fit the the drive unit. One solution is to use an intermediate drive, another solution is a reversed conveyor with a guided chain drive unit. A reversed conveyor can be created i...