Popular Articles

  1.  Grouped parts

    Last Updated: 08/11/2019 in Engineering Tools Design Tool General functionality
    With the release of Design Tool version 2.5 it is possible to group several parts together. With grouped parts it becomes easier to move parts around in the 3D world. To group several parts, select them and then click on Home->Grouping->Group , whi...

  2. Using spell check

    Last Updated: 06/11/2019 in Engineering Tools Quotation Tool Printing and documents
    Any form that uses the "Word" control has built in spell check capabilities. Spell check is done "on demand" and by default the language used is English (US). The sample below is showing the Quote Document / Text element module, but the "Word" cont...

  3. Add free text

    Last Updated: 06/11/2019 in Engineering Tools Design Tool Drawing
    There is no separate feature for free text in Design Tool drawings. However, it is quite simple to use the Rectangle Annotation feature with a small modification. Add annotation Click on  Drawing tab -> Annotation group -> Rectangle button to act...

  4. Frequently Asked Questions

    Last Updated: 06/12/2016 in Engineering Tools My FlexLink (Online Store)
    Why is my new project not available? New projects opened in the ERP system (Movex) is transferred to the Online Store database once a day (00:00 CET). It is not possible to place orders in Online Store with new project numbers until the project...

  5. Robotic Tools

    Last Updated: 20/11/2019

  6. Controls Workflow in FLDT

    Last Updated: 06/11/2019 in Engineering Tools Design Tool Controls
    Working with Controls  require the Controls tab in the ribbon to be selected. When modules and drive units are configured, distributed controllers can be linked to the modules. Step 1:  Assign Module ID Click Controls  tab -> Module ID ...

  7. Multiple Drawings

    Last Updated: 06/11/2019 in Engineering Tools Design Tool Drawing
    From Design Tool version 3.3.0 it is now possible to have multiple drawing templates within the Drawing view. In the bottom of the view there is a toolbar showing templates in the layout. Each template is separate and can have different part lists o...

  8. WLX end drive unit J

    Last Updated: 25/02/2019 in Engineering Tools Chain Calculation Tool
    The WLX end drive unit J is a combined end drive unit and idler end unit. A fixed connection makes it possible to quickly design and build a conveyor line without vertical or horizontal alignment. The J-drive is based upon the compact versions of th...

  9. Troubleshooting

    Last Updated: 28/01/2021 in Engineering Tools X45e
    Background It is always possible that you may have some issues while configuring a X45e unit till it runs as required. This guide should help to fix the most usual issues when starting to use X45e units. Prerequisites Hardware ...

  10.  Merging conveyors by using Positioning and Quick adjust

    Last Updated: 27/01/2020 in Engineering Tools Design Tool General functionality
      ...