New Articles

  1. Lua mode

    Background The X45e units (Ethernet version) can be used in more generic applications. This article focuses on the Lua mode. It should be used if a functionality is required that is not part of the build in functionalities. In this mode a Lua scrip...
  2. WLX end drive unit J

    The WLX end drive unit J is a combined end drive unit and idler end unit. A fixed connection makes it possible to quickly design and build a conveyor line without vertical or horizontal alignment. The J-drive is based upon the compact versions of th...
  3. WLX end drive unit J

    The WLX end drive unit J is a combined end drive unit and idler end unit. A fixed connection makes it possible to quickly design and build a conveyor line without vertical or horizontal alignment. The J-drive is based upon the compact versions of th...
  4. Default project

    Version 1.0.6964.26312 (and newer) of FlexCAD is prepared for Amber. To use Amber properly it is required to set the active project in Inventor to "Default". If any other project is active at startup an information message will be displaye...
  5. Quickstart guide

    Quickstart Guide Launch FlexLink Configuration Tool, http://<hostname>:8300 Click on GET ORDER and Enter order number Click on the order in the Order list Click on the order item you want to start with Follow the follo...
  6. Configure CANOpen

    Configure CANOpen workstep is used to set correct node ID's to the CANOpen devices on the module. Happy path Commission the module and connect CAN connection to Workstation SCDC and 24 V power to the module When you select the ...
  7. Controls Workflow in FLDT

    Working with Controls  require the Controls tab in the ribbon to be selected. When modules and drive units are configured, distributed controllers can be linked to the modules. Step 1:  Assign Module ID Click Controls  ta...
  8. Component quotes

    FlexLink Quotation Tool contains a Word template for a Component quote that can be used as the base for a operating unit's component quotes. With this template it is possible to create component quotes for customers that have not yet been added ...
  9. Manually send FLQT pricelists to the web service

    Send Single Pricing Condition.docx The attached document describes how to send pricing conditions from SAP to the FL web service (via PI). Condition types : ZP01 - T1 price list ZDP1 - PSD -> OU markup (transfer prices...
  10. Multiple Drawings

    From Design Tool version 3.3.0 it is now possible to have multiple drawing templates within the Drawing view. In the bottom of the view there is a toolbar showing templates in the layout. Each template is separate and can have different part lists o...